intrinsic viscosity
英 [ɪnˈtrɪnzɪk vɪˈskɒsəti]
美 [ɪnˈtrɪnzɪk vɪˈskɑːsəti]
特性黏数；特性黏度，本征黏度，固有黏度
双语例句
- The intrinsic viscosity, weight average molecular weight and index of molecular weight distribution of PVC-g-BA copolymer increased with increasing grafting degree.
PVC接枝共聚物的特性粘度随接枝率增加而增加，其重均分子量和分子量分布指数均大于接枝所用的PVC树脂。 - The key factors affecting the polymer intrinsic viscosity were found to be monomer recrystallization times, stannous octoate concentration and polymerization time.
单体重结晶次数、辛酸亚锡浓度、聚合时间等条件均是影响聚合物特性粘数的重要因素。 - The effects of the mole ratio of anhydride to amino group of chitosan in the feed solution on the solubility, intrinsic viscosity and molecule weight of the product were studied.
研究了投料物质的量比对产物的溶解性、特性黏度和相对分子质量的影响。 - Research of intrinsic viscosity deviation of chitosan analyzing by one-point method
一点法分析壳聚糖特性粘度偏差值的研究 - The spot-checking results of fiber grade PET chip were analysed from intrinsic viscosity, diethylene glycol content, melt point, carboxyl end group, color, agglomerating particle and powder.
从特性黏度、二甘醇含量、熔点、端羧基值、色度、凝聚粒子、粉末等方面，对纤维级聚酯切片的抽检结果进行了分析。 - The aqueous solution properties of poly-dimethyldiallylammonium chloride ( PDMDAAC) with different molecular weight ( intrinsic viscosity) and narrow distribution were studied in this paper.
本文研究了有系列相对分子质量均聚物PDMDAAC的水溶液性质。 - Effects of monomer concentration, temperature, initiator and polymerization time on the intrinsic viscosity number were discussed and a new fracturing fluid formulation was obtained.
对合成条件进行了分析，探讨了单体、温度、引发剂和反应时间等因素对聚合物特性粘数的影响，并在此基础上形成压裂液的配方。 - It is a polymeric coupling agent that reacts with degraded polymers to restore the original molecular weight as well as I.V. ( intrinsic viscosity) and melt viscosity.
它是通过与已降解聚合物进行化学反应，恢复其原来的分子量和特性粘度，增大熔融粘度。 - Improvement of the Experiment for Measuring the Molecular Weight of Polymer by Measuring its Intrinsic Viscosity
粘度法测定高聚物分子量实验的改进 - Effect of test condition on bottle grade PET chip intrinsic viscosity results
测试条件对瓶级聚酯切片特性黏度的影响 - The intrinsic viscosity and Huggins constant characterizing molecular weight and hydrophobic interaction were discussed.
文中讨论了表征分子量和疏水相互作用的特性粘数与Huggins常数。 - The influence of silica on the monomer conversion and intrinsic viscosity of composites during polymerization was investigated in detail.
研究了聚合过程中纳米SiO2对单体转化率及复合材料特性粘度的影响； - The simulation results show that the shaped degree is decreasing when the spinning temperature and intrinsic viscosity are increasing;
模拟的结果表明：扁平纤维的异形度随着纺丝温度及特性黏度的升高而降低； - The degree of substitution and the intrinsic viscosity of the products were determined.
测定了产物的取代度、特性粘数、吸湿与保湿性，并用IR进行了结构表征。 - The effects of rotate speed, compression force and the intrinsic viscosity of PDN were significant.
转速、压片压力及PDN的特性粘度对缓释药物的释放均有一定的影响。 - The results showed that under microwave irradiation, the intrinsic viscosity and the conversion of the polycondensate were raised.
实验结果表明：微波辐射能提高缩聚物的特性粘数和转化率。 - The determination of polyester intrinsic viscosity with dual capillary viscosity method was introduced.
介绍了双毛细管黏度法对聚酯特性黏度的测试。 - The specific rotation, intrinsic viscosity, sedimentation constant and molecular weight of these two polysaccharide were all presented.
本文报告了两种多糖的比旋度、特性粘度、沉降系数及分子量。 - The specific rotation, intrinsic viscosity and molecular weight of this polysaccharide were all presented.
本文还报道了该多糖的比旋度、特性粘度和分子量。 - The effect of VTMS on the intrinsic viscosity and solubility of the polymers is discussed.
探讨了VTMS的投料比对聚合物的特性粘度和水溶性的影响； - The intrinsic viscosity of the sulfonated aromatic polyureas decreased with the increase of sulfonation temperature and sulfonation time.
特性粘度测试表明，磺化改性后聚脲样品的特性粘度随磺化温度的升高及磺化时间的延长而降低。 - In this paper the PBT/ PET blended fiber is studied and its intrinsic viscosity, crystallinity are discussed.
研究了PBT／PET共混纤维，就其特性粘度、结晶能力作了进一步测试讨论。 - Intrinsic viscosity is the important content of product quality index of polyester production.
特性粘度是聚酯生产中产品质量指标的重要内容。 - Intrinsic viscosity number measurement and TLC were used to monitor the prepolymerization reaction.
用红外、特性粘数[η]及薄层色谱方法对预聚反应、聚合度及改性沥青进行了分析。 - The decrease of intrinsic viscosity and increase of carboxy end group are affected by the specific surface of resin.
特性粘度降低和端羧基含量增加这两种方法受树脂比表面积的影响； - The effects of monomer concentration, reaction temperature, initiator dosage on polymerization rate and intrinsic viscosity of product were investigated.
探讨了单体浓度、反应温度、引发剂用量等因素对聚合反应速率和产物特性黏数的影响。 - Ubbelohde viscometer was used to determine the intrinsic viscosity of the polymer. Through the intrinsic viscosity to compare the molecular of the polymer, study the effect of the polymerization condition to the the molecular of polymer.
用乌氏粘度计测定了四种聚合物的特性粘度，通过特性粘度大小比较聚合物分子量大小，研究了聚合条件对聚合物分子量大小的影响。 - Thermal stability was also analyzed by the intrinsic viscosity variation.
此外，通过特性粘度的变化，对热稳定性能进行了分析。 - Reaction temperature has also a greater influence on the intrinsic viscosity which is decreased with the increased reaction temperature.
反应温度对聚合物特性粘度有较大的影响，随着反应温度升高，聚合物特性粘度下降。